Building automation technician
Building automation technician
Building automation technician – become a key player in the energy-efficient buildings of the future
The green transition places new demands on buildings' energy consumption and intelligent management. In this training course, you will learn to work with the technologies that make buildings smarter, more energy efficient and more sustainable.
Energy-efficient building automation – creates both energy savings and financial gains.
Through six practical modules, you will gain skills within IBI, CTS, KNX, lighting control and IoT - from installation and programming to optimization, troubleshooting and energy savings.
See dates for the individual modules below under "Subjects on this course".
Module 1: IBI, function and installation
Learn to wire and install components for an intelligent building installation (IBI).
The course will include small practical exercises with IBI, KNX, DALI and DALI gateway.
Understanding of intelligent installations in buildings and their interaction.
Insight into how intelligent building installations and their programming can help make a building more energy efficient and increase comfort.
Knowledge of different topologies, e.g. DALI, KNX, Modbus and BACnet.
Knowledge of different types of conventional analog and digital signals.
Laying and connecting cables and installing components for intelligent building installations, taking into account cable types.
Troubleshooting the most common types of errors.
Quality assurance of the work and documentation of work performed
Module 2: BMS systems, system knowledge
Learn how to connect sensors and actuators to a building management system.
Connecting sensors and actuators to a building management system.
Knowledge of the structure of CTS systems (Central Condition Monitoring and Control)
Knowledge of applicable rules and standards for the placement and connection of sensors and actuators to a building management system.
Select, place and connect sensors and actuators as active components for a BMS system for heating and ventilation.
Knowledge of how the units of a building management system are connected and communicate.
Documentation and quality assurance of own work.
Knowledge of the connection between CTS and BMS (building management system) and the possibility of optimizing by integrating with other systems.
Module 3: BMS system, programming and troubleshooting
Learn to program and commission a building management system, taking into account applicable rules and standards.
The course focuses on ventilation.
Knowledge of the principles behind configuring and programming BMS systems (Central Condition Monitoring and Control)
Graphical user interface setup.
Knowledge of various options for energy saving in connection with building management systems.
Make simple connections to smaller BMS systems based on knowledge of how to commission and regulate a BMS system
Knowledge of applicable laws and regulations.
Quality assurance of own work and documentation of work performed.
Troubleshooting the most common types of errors in building automation systems.
Siemens Synco is used.
Module 4: KNX installations, programming and system knowledge
Gain a basic understanding of intelligent installations with KNX and learn how to perform simple programming of a KNX installation.
Gaining a basic understanding of intelligent installations with KNX, including possibilities and limitations
Knowledge of KNX so that guidance can be provided to customers on the application possibilities of the KNX system
Knowledge of planning and construction as well as quality assurance of a small KNX installation based on the applicable rules and standards for the KNX system's network topology and the provisions of the High Voltage Executive Order
Perform simple programming using the ETS programming software and commission and document a small KNX installation
Building KNX installations with multiple lines
Using the ETS programming software for fault location and troubleshooting of KNX installations
Programming and setting of program parameters on KNX installations for buildings
Module 5: Lighting systems, energy efficiency and comfort
Learn to optimize existing systems and profitability when investing in new systems. Learn to choose possible solutions based on knowledge of ballasts, drivers, gateways, IoT (Internet of Things) and PoE (Power over Ethernet).
Guidance of the customer in choosing a solution based on calculations of profitability (payback times) when investing in a new plant in relation to optimizing existing plants.
Based on the customer's needs, select possible solutions based on knowledge of ballasts, drivers, gateways, IoT (Internet of Things) and PoE (Power over Ethernet).
Select, place and install control and control components for a lighting system, including DALI, PWM (dimming technology), zone control, sensors and controllers.
When installing, take precautions to avoid electrical noise (EMI and EMC) in connection with lighting controls.
The participant programs and adjusts existing or new lighting systems with the aim of high energy efficiency and optimal comfort. The participant can also troubleshoot and correct common types of errors.
The participant quality assures their own work.
The participant has knowledge of operation and maintenance plans, including measurements and data for documentation.
Module 6: IoT in the electricity industry - introduction
Learn to use simple Internet of Things (IoT) sensors and applications for electrical installations in buildings.
Course content
Apply simple Internet of Things (IoT) sensors and applications to electrical installations in buildings.
Knowledge of different types of IoT sensors and simple IoT applications relevant to electrical installations (for example, measurement of electricity consumption and power, indoor climate, door status, light level, smoke detection).
Set up sensors and connect them to relevant applications and platforms.
Collect simple data from the installations and use this data to improve the use of the installation, e.g. through improved fire protection or building operations.
Understanding the possibilities of using IoT in electrical installations and can help identify customer needs with an eye for new IoT opportunities and the value they can create.
Communicate the benefits of simple IoT solutions to the customer.
Target group
The training course is for those who work with or will work with building installations.
Course certificate
Competency-giving course certificates and supplementary training certificates are issued.
If you are employed and have education up to and including skilled level, your employer can receive VEU compensation during the course up to DKK 1,017 per day (2026 rate). If you are more than 60 km from your home to the school, you/your employer can receive a subsidy for accommodation in Aalborg of up to DKK 600 per day and in addition a subsidy for transport.
Read more about your subsidy options on this page.
Economy
The vast majority of courses at Techcollege are AMU courses. AMU is an abbreviation for ArbejdsMarkedsUddannelse and is a competency-based adult education. You can participate in AMU courses under advantageous conditions because the Ministry of Education provides financial support. Read about your options below.
If you are employed or self-employed, and if you have education up to and including skilled level, the following applies:
The course price can be seen under the individual course. You or your employer must pay the low rate. You can obtain VEU compensation (wage loss compensation) of DKK 1,017 per day, equivalent to the full unemployment benefit rate (2026 rate). A maximum of VEU compensation can be obtained for 10 weeks of AMU courses within a 12-month period, and a maximum of VEU compensation can be obtained up to 3 times for the same AMU target within a 12-month period. If you are more than 60 km from your home to the school, you can get a subsidy for food and accommodation at a CVR-registered accommodation. You must book and pay for food and accommodation yourself. After the course, you can get a refund of up to DKK 600 per day for documented expenses. This is done via Skolernas Digitale BlanketFlow: www.sdbf.dk. In addition, a subsidy for your transport (regardless of the means of transport) of DKK 1.12 per km is provided after the first 24 km. This is applied for together with the VEU allowance.
If you are employed or self-employed, and have a short higher education or higher education, the following applies:
The course price can be seen under the individual course. You or your employer must pay the high rate. There is no subsidy from the Ministry of Education, therefore the full course price is charged. There is no possibility of VEU compensation (wage loss compensation), and accommodation, meals and transport are at your own expense.
If you have not used your higher education within the past 5 years, it is considered obsolete, and you can therefore apply for a subsidy for food and accommodation as well as VEU compensation (see the instructions above under "education up to and including skilled level"). However, you must still pay the full course price.
If you are unemployed and entitled to 6 weeks of job-oriented training, the following applies:
As an unemployed person with the right to 6 weeks of job-oriented training, you can participate in AMU courses free of charge. When registering, you must provide TECHCOLLEGE with contact information for the unemployment insurance fund that will grant you the desired courses. If you are more than 60 km from your home to the school, you are entitled to a subsidy for food and accommodation at a CVR-registered accommodation. You must book and pay for food and accommodation yourself. After the course, you can be reimbursed up to DKK 600 per day for documented expenses. This is done via Skolernas Digitale BlanketFlow: www.sdbf.dk . You can also apply for a subsidy for your transport (regardless of means of transport) of DKK 1.12 per km after the first 24 km. This is applied for on form AB421, which must be submitted to your unemployment insurance fund.
If you are unemployed and are taking training as part of a job plan, the following applies:
As an unemployed person who wants to participate in training as part of a job plan, you can participate in AMU courses free of charge. When registering, you must provide TECHCOLLEGE with the contact information of your job center caseworker, who will grant you the desired courses. If you are more than 60 km from your home to the school, you must make an agreement with your Job Center before the course starts to grant and pay for your expenses for food and accommodation. You can also apply for a subsidy for your transport (regardless of the means of transport) of DKK 1.12 per km after the first 24 km. This is applied for on form AB421, which must be submitted to your unemployment insurance fund. You will find a link to the form here: https://info.jobnet.dk/blanketter
Financing via Competence Development Funds
The competence funds are an initiative in most collective agreements that may mean that your employer has already indirectly paid for the course! You can apply for a subsidy for continuing education via competence funds. The funds are a result of the collective agreement renewal and provide the opportunity to apply for a subsidy for self-selected continuing education and training. You can spend up to two weeks a year on self-selected education, and you can apply to the competence funds for a subsidy for course fees, salary reimbursement and accommodation. Ask about the options at your workplace.
Private individuals
If you register as a private individual, there are no subsidy options.
The above is legislation, and the rates are valid in 2026. Reservations are made for any changes in the law.
Registration if you are employed or self-employed:
You or your employer are responsible for course registration and application for VEU reimbursement and transportation subsidies for AMU courses. This is done via the portal www.voksenuddannelse.dk .
When you click "Register" on a course page, you will automatically be linked to www.voksenuddannelse.dk .
Techcollege is happy to provide guidance on the use of www.voksenuddannelse.dk .
Sign up if you are available:
If you are unemployed, simply click on "registration" on the course on our website and answer no to the fact that you are employed. Then you must fill out the registration form. Remember to write the contact information of your job center case manager in the comments field. We will then send current forms to you, your Job Center and unemployment insurance fund.
Call:
When registering, you/your employer choose whether the invitation to the course should be sent to either you and/or your employer and the invitation should be sent to e-box.
Payment terms and cancellation policies
Remember to adhere to the payment deadline stated on the invoice. Your payment is crucial for the school's state subsidy. If you fail to pay, we will be forced to charge you the full course fee.
Cancellation and no-show fee:
If you cancel your course later than 5 business days before the start of the course:
1. For courses with a duration of up to 37 lessons, DKK 1,500 is paid.
2. For courses with a duration of more than 37 lessons, DKK 2,500 is paid.
If you fail to attend the course without notifying the course department:
1. For courses with a duration of up to 37 lessons, DKK 2,500 is paid for non-attendance from the first day of the course.
2. For courses with a duration of more than 37 lessons, DKK 3,500 is paid for non-attendance from the first day of the course.
You may be exempt from paying the tax if:
1. The employer documents that the absence or cancellation is due to a circumstance that is legally due in the employee's employment relationship.
2. The employer replaces a registered employee who is prevented from working with another.
3. The course is cancelled at the request of the educational institution.
4. The employer has paid an additional fee for holding the course, which is cancelled at the request of the educational institution.
Changes and reservations
We reserve the right to cancel announced courses if there are not a sufficient number of participants.
Accommodation
A course stay in Aalborg can give you many experiences alone or together with other course participants.
If you are more than 60 km from your home to the school, and if you otherwise meet the conditions, you can be reimbursed up to DKK 600 per day for documented expenses for food and accommodation. If you wish to read more about the rules/executive order regarding subsidies for food and accommodation, you can do so here.
How to do it:
You must book and pay for food and accommodation yourself (it MUST be a CVR-registered accommodation).
You will not receive a subsidy for food and accommodation on weekends between two course weeks.
You can get accommodation from the day before the course starts if it is reasonable in relation to the course participation.
Upon arrival the day before the start of the course, no meal allowance will be given.
If possible, book accommodation at:
Kompas Hotel Aalborg, Østerbro 27, 9000 Aalborg, tel. 9812 1900
Techcollege collaborates with KOMPAS Hotel Aalborg, which is located close to the school and also close to Aalborg Center. Here you can get a slightly reduced price for accommodation. Included in the price is breakfast and fitness in DGI Huset Nordkraft , which is located directly opposite the hotel.
When booking a room at KOMPAS Hotel Aalborg, please provide booking code: "TECHCOLLEGE".
Other accommodation options – see: http://www.visitaalborg.dk/aalborg/turist
If the chosen accommodation does not offer breakfast, you can buy breakfast, lunch and coffee/cake at reasonable prices in the school canteen.
Documentation:
The original invoice for the overnight stay must state:
Full name and address of the accommodation.
Receipt from the accommodation for receipt of payment.
Your name.
The start and end dates of the overnight stay must be stated.
Refunds are made via this link:
See instructions here.
Reservations are made for changes in applicable legislation.
Private individuals
If you register as a private individual, there are no subsidy options.
contact persons
